FastFerment 7.9 Gallon Conical Fermenter

FastFerment 7.9 Gallon Conical Fermenter

$99.99
Qty:

FastFerment 7.9 Gallon Conical Fermenter

The FastFerment System is a one-stage fermenter, which allows brewers and winemakers to do primary and secondary fermentation in the same unit. This saves approximately 80% of the time and labor needed to make a batch of beer or wine compared to conventional buckets and carboys. FastFerment uses less equipment than carboys & pails, which means less clutter and less clean up for you.

FastFerment is more sanitary because in a primary bucket, brewers have 100% direct contact of product to dead yeast and sediment on the bottom. The FastFerment system reduces the contact surface of product to sediment on the bottom by 99% with a 1" ball valve, thus making some of the cleanest and purest homebrew and wine. With the mechanism of the ball valve and couplers, approximately a foot off of the sediment elevates the FastFerment. These two factors allow for a complete follow through on the fermentation without disturbing the process when racking. When the fermentation is complete you can easily close the ball valve, which isolates the product from the sediment on the bottom. Then the collection ball can be removed and you can either filter or bottle directly from FastFerment through the hose.

Kit Contents:

  1. One 7.9 US Gallon / 30 Litre Conical Fermenter
  2. 6" (15cm) Screw Top, Grommet & Airlock
  3. Bottom Collection Ball For Harvesting Yeast
  4. 1" Union Teflon Valve and fittings
  5. Wall Mounts (2), Mounting Bolts & Anchors (4)
  6. 1/2" (1.25cm) PVC Hose (4’/120cm) & Hose Clamp
  7. Permanent Thermowell for Temperature Monitoring
  8. Instructions

Features and Benefits:

  1. Easy Cleaning and Batch Stirring - 6" (15cm) removable screw top
  2. Total Capacity 7.9 US Gallons/ 30 Litres - Made for 5 Gallon batches with blow offs3. Easy Wall Mounting System - Mounts to standard 16" (40cm) wall studs
  3. 33% Bigger Valve for Increased Flow Rate - 1" (2.5cm) Bottom valve compared vs. 3/4" (2cm)
  4. Collection Ball for Yeast Harvesting - Save $100's & harvest your Yeast Strains!
  5. Temp. Monitoring Capabilities - ThermoWell included - Thermometer Available

Specs:

  1. Made with HDPE: Food Grade
  2. Heights:
    On wall mounts from bottom of collection ball:
    To top of Airlock: 35.5", 90cm
    To top of Lid: 32", 81cm
    In the Stand:
    To top of Airlock: 37", 94cm
    To top of Lid: 33.5", 85cm
  3. Widths:
    With Wall Mounting Bolts: 14.75", 37.5cm
    Without Wall Mounting Bolts: 14.25", 36cm
  4. 7.9 US Gallons/ 30 Litres
  5. 1" (2.5cm) Teflon Seated Union Valve
  6. 6" (15cm) Removable Screw Top Lid

Customer Reviews

There are no customer reviews for this product. However, you can be the first person to add a review for this product.

Add Review

Add Review

 
 
 
 
 

(Your browser will be redirected back to this page)

Subtotal: $0.00
>